Becker PVDF Plating Aluminium Plastic Composite Panels for Exterior Application

Becker PVDF Plating Aluminium Plastic Composite Panels for Exterior Application

Alcadex® ACM is the conventional aluminum composite panel and widely used for wall cladding. Alcadex® ACM is made up of three layers, with two layers of aluminum skin on the top and bottom, and one layer of anti-toxic polyethylene material in the middle. Structure Protective film to protect...
  • Alcadex® ACM is the conventional aluminum composite panel and widely used for wall cladding. Alcadex® ACM is made up of three layers, with two layers of aluminum skin on the top and bottom, and one layer of anti-toxic polyethylene material in the middle.  

    Structure

    Protective film to protect panel surface

    PVDF coating with clean or colors applied on aluminium sheet.                                                                               

    Polymeric membrane composites the aluminium onto core.

    LDPE/FR core is made from low density polyethylene or fireproof grade materials.

    Specification

    Width

    1000mm-2000mm

    Panel Thickness

    2mm-10mm

    Aluminium Alloy

    AA1100, AA3003 (other grade on requirement)

    Aluminium Thickness

    0.18-1.0 mm

    Coating

    PVDF / Nano /    FEVE

    Core

    LDPE /    Fireproof / A2 non-combustible

    Length

    6000mm in maximum

    Color

    Solid / Metallic / Marble / Wooden / Brush / Glossy/ Mirror

    MOQ

    800 SQM/size/color

    Brand / OEM

    ALCADEX® / Customized

    Delivery

    15 day after getting deposit and color confirmation

    Payment Terms

    T/T / L/C / Western Union / Paypal

    Packing

    Wooden Package or bulk loading


    Welcome to buy the becker pvdf plating aluminium plastic composite panels for exterior application from our factory. As one of the professional manufacturers and suppliers in China, we will offer you good price and excellent service.


  • Panel Installation Notice

    Do not stick PVC tapes, polyurethane and modified silicon sealant onto protective film.

    Plasticizers contained in these materials penetrate the film and may cause glossy change on the coating

    Please peel off the protective film within 45 days after installation

    All the panels installation should follow protective film arrow and keep all arrows same direction. Otherwise may cause color aberration after protective film peeling off.

    Correct Installation direction:

     

    Wrong Installation direction:


     

    Cleaning and Maintanence

    It is highly recommended that when using any type of cleaner, personal safety and protection is the top priority. Please use appropriate skin and eye protection to prevent chemical irritation or burns before commencement of works.

    The amount of dirt accumulation on Alcadex® panels depends on a numbers of factors, but more importantly upon the building's geographic location and position. Other varying factors that should be considered when scheduling the cleaning of the panels are panel location on the building structure, local soil type, weather, amount of dirt build up and pollution.

    Always test cleaning materials, cleaners and procedures on a small inconspicuous area prior to use on a large scale.

    Normal dust and dirt: a 5% solution (one part detergent to 20 parts of water) of commonly used industrial detergents will not have any deleterious effect on the PVDF coated surface.

    For rust stains or dried mortar / concrete: hydrochloric acid (10% muriatic acid) diluted with ten parts water would be effective in such cases. It is very important that a small area be tested to see if this will affect the panel surface before proceeding with cleaning the entire project. 


Related Products

Feedback